The Command Feedback Tab allows the user to set their preferred feedback when executing Commands within Echo. These can act as confirmation to the user that a command has been successfully understood and executed.
 Check Toggle Microphone LEDsIf ticked, supported microphones (such as the Olympus RM-series and Philips SpeechMike-series microphones) will display visual feedback (coloured flashes) using the inbuilt LEDs.
The LED colours and sequences depend on model of hardware, and given in the table below.
|
Action
|
Olympus
|
Philips
|
|
Transcribing
|
Red (solid)
|
Red (solid)
|
|
(Dis)connecting
|
Blue (flashing)
|
Red (flashing)
|
|
Executing Command
|
Green (flashing)
|
Green (flashing)
|
|
Command Mode
|
Green (solid)
|
n/a
|
|
Command Not Recognised
(in Command Mode)
|
Red (flashing)
|
n/a
|
|
|
 Check Toggle Command AudioIf ticked, Echo will play an audio tone when a command is executed.
|
|
 Set Command Pause IntervalKeyboard commands may be defined to execute a chain of consecutive sets of key presses, to perform a particular set of steps within an application. Command Pause Interval sets the delay between steps of a multi-step command. Slower computers (where programs may take longer to complete each step) may require a larger command pause interval for multi-step commands to execute correctly. The default Command Pause interval is 200ms.
|
|
 Save ButtonClick the Save button to save the changes.
|
|
